Experimental and numerical study of flow and ignition and lean blowout characteristics of jet-cooled wall flameholder in a dual-mode combustor

• The wall flameholder is one of the credible alternatives to realize pilot ignition in augmented/ramjet combustors. To overcome the ablation for a long-term operation, two types of jet cooling, external-inhaled air and pressure-driven jet cooling, are proposed for the wall flameholder. In this work, the flow and combustion process in a laboratory scale rig is studied for different cooling schemes and cooling conditions using experimental and numerical methods. Flow analysis in pressure-driven jet cooling scheme shows that the flow field of flameholder is influenced significantly by the cooling hole angle on the oblique plate α and on the rear plate β. In particular, the cooling jet angle combinations (α=30o, β=30o) and (α=90o, β=150o) are the two schemes with the most different characteristics. To investigate the effects of jet cooling type and cooling jet angle on the flow, ignition, and lean blowout (LBO) characteristics, the two distinctively different angle combinations are applied to form two kinds of jet cooling schemes mentioned above. Results suggest that the jet cooling type has less impact on the flow field but more influence on the flow loss than the cooling jet angle. The ignition performance of cooling schemes with α=30o and β=30o is better than that of those with α=90o and β=150o, but it has a more significant flow loss. The LBO limits of external-inhaled air cooling are lower than that of pressure-driven jet cooling. Moreover, the ignition and LBO limits decrease gradually with the increased mainstream temperature and they are only slightly affected by the mainstream velocity. Notably, the pressure-driven jet cooling scheme can slightly reduce the flow loss but it leads to a deteriorated ignition and LBO performance. The external-inhaled air cooling scheme with α=30o and β=30o has an excellent ignition and LBO performance, and the ignition and LBO limits increase with the increasing cooling air flow rate and the decreasing cooling air temperature.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik -- Energiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering -- Energy Engineering (hsv//eng)

Nyckelord

Flow characteristics

Ignition limit

Jet cooling

Lean blowout limit

Turbine-based combined cycle

Wall flameholder

Publikations- och innehållstyp

art (ämneskategori)

ref (ämneskategori)