Sökning: WFRF:(Leicht Alexander 1987)
> (2021) >
Effect of part thic...
-
Leicht, Alexander,1987Chalmers tekniska högskola,Chalmers University of Technology
(författare)
Effect of part thickness on the microstructure and tensile properties of 316L parts produced by laser powder bed fusion
- Artikel/kapitelEngelska2021
Förlag, utgivningsår, omfång ...
-
Elsevier BV,2021
-
electronicrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:research.chalmers.se:1b008c4f-4c96-4a54-91bd-ce70386ddfd0
-
https://research.chalmers.se/publication/522523URI
-
https://doi.org/10.1016/j.aime.2021.100037DOI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:art swepub-publicationtype
-
Ämneskategori:ref swepub-contenttype
Anmärkningar
-
Additive manufacturing provides a unique possibility to manufacture parts with advanced design and thin-walled structures. To explore thin-wall capacity, laser powder bed fusion was employed to fabricate 316L samples with different section thicknesses. A detailed microstructure characterization was then carried out, and tensile properties were assessed. It was found that reducing the part thickness did not affect the microstructure but did reduce the tensile properties. Samples with 1 mm thickness exhibited the lowest yield strength of 457 ± 11 MPa and elongation to fracture of 49 ± 20%, while the tensile properties improved when the sample thickness was increased to 3 mm. The 3 mm thick samples generated tensile properties comparable to those of standard dimensions. The results emphasize that part thickness must be considered when assessing mechanical properties and must be adjusted when performing design optimization and simulations of samples produced with laser powder bed fusion.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Pauzon, Camille Nicole Géraldine,1994Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)pauzon
(författare)
-
Rashidi, Masoud,1987Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)rashihi
(författare)
-
Klement, Uta,1962Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)uk
(författare)
-
Nyborg, Lars,1958Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)nyborg
(författare)
-
Hryha, Eduard,1980Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)hryha
(författare)
-
Chalmers tekniska högskola
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Advances in Industrial and Manufacturing Engineering: Elsevier BV22666-9129
Internetlänk
Hitta via bibliotek
Till lärosätets databas
- Av författaren/redakt...
-
Leicht, Alexande ...
-
Pauzon, Camille ...
-
Rashidi, Masoud, ...
-
Klement, Uta, 19 ...
-
Nyborg, Lars, 19 ...
-
Hryha, Eduard, 1 ...
- Om ämnet
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Materialteknik
- Artiklar i publikationen
-
Advances in Indu ...
- Av lärosätet
-
Chalmers tekniska högskola