Sökning: id:"swepub:oai:research.chalmers.se:4030e4a5-dda8-44aa-9a9c-10348ae79fa6" >
Multidisciplinary A...
-
Kyprianidis, Konstantinos,1984Mälardalens högskola,Akademin för ekonomi, samhälle och teknik,Framtidens energi,Cranfield University, UK,Future Energy Center
(författare)
Multidisciplinary Analysis of a Geared Fan Intercooled Core Aero-Engine
- Artikel/kapitelEngelska2014
Förlag, utgivningsår, omfång ...
-
2013-10-22
-
ASME International,2014
Nummerbeteckningar
-
LIBRIS-ID:oai:research.chalmers.se:4030e4a5-dda8-44aa-9a9c-10348ae79fa6
-
https://doi.org/10.1115/1.4025244DOI
-
https://research.chalmers.se/publication/188159URI
-
https://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-25079URI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:art swepub-publicationtype
-
Ämneskategori:ref swepub-contenttype
Anmärkningar
-
The reduction of CO2 emissions is strongly linked with the improvement of engine specific fuel consumption, along with the reduction of engine nacelle drag and weight. One alternative design approach to improving specific fuel consumption is to consider a geared fan combined with an increased overall pressure ratio intercooled core performance cycle. The thermal benefits from intercooling have been well documented in the literature. Nevertheless, there is very little information available in the public domain with respect to design space exploration of such an engine concept when combined with a geared fan. The present work uses a multidisciplinary conceptual design tool to analyze the option of an intercooled core geared fan aero engine for long haul applications with a 2020 entry into service technology level assumption. With minimum mission fuel in mind, the results indicate as optimal values a pressure ratio split exponent of 0.38 and an intercooler mass flow ratio of 1.18 at hot-day top of climb conditions. At ISA midcruise conditions a specific thrust of 86 m/s, a jet velocity ratio of 0.83, an intercooler effectiveness of 56%, and an overall pressure ratio value of 76 are likely to be a good choice. A 70,000 lbf intercooled turbofan engine is large enough to make efficient use of an all-axial compression system, particularly within a geared fan configuration, but intercooling is perhaps more likely to be applied to even larger engines. The proposed optimal jet velocity ratio is actually higher than the value one would expect by using standard analytical expressions, primarily because this design variable affects core efficiency at midcruise due to a combination of several different subtle changes to the core cycle and core component efficiencies at this condition. The analytical expressions do not consider changes in core efficiency and the beneficial effect of intercooling on transfer efficiency, nor do they account for losses in the bypass duct and jet pipe, while a relatively detailed engine performance model, such as the one utilized in this study, does. Mission fuel results from a surrogate model are in good agreement with the results obtained from a rubberized-wing aircraft model for some of the design parameters. This indicates that it is possible to replace an aircraft model with specific fuel consumption and weight penalty exchange rates. Nevertheless, drag count exchange rates have to be utilized to properly assess changes in mission fuel for those design parameters that affect nacelle diameter.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Rolt, AndrewRolls-Royce PLC,Rolls-Royce plc, UK
(författare)
-
Grönstedt, Tomas,1970Chalmers tekniska högskola,Chalmers University of Technology,Chalmers University of Technology, Sweden(Swepub:cth)thgr
(författare)
-
Mälardalens högskolaAkademin för ekonomi, samhälle och teknik
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Journal of Engineering for Gas Turbines and Power: ASME International136:11528-89190742-4795
Internetlänk
Hitta via bibliotek
Till lärosätets databas