SwePub
Sök i LIBRIS databas

  Utökad sökning

WFRF:(Yang Xi)
 

Sökning: WFRF:(Yang Xi) > Fabrication and bon...

  • Jiang, Bing-XinFuzhou University (författare)

Fabrication and bonding of In bumps on Micro-LED with 8 μ m pixel pitch

  • Artikel/kapitelEngelska2024

Förlag, utgivningsår, omfång ...

  • 2024
  • electronicrdacarrier

Nummerbeteckningar

  • LIBRIS-ID:oai:research.chalmers.se:692ddf29-05a0-4ac2-9f2b-10036a699f62
  • https://research.chalmers.se/publication/540655URI
  • https://doi.org/10.1088/2631-8695/ad3610DOI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:art swepub-publicationtype
  • Ämneskategori:ref swepub-contenttype

Anmärkningar

  • Indium (In) is currently used to fabricate metal bumps on micro-light-emitting diode (Micro-LED) chips due to its excellent physical properties. However, as Micro-LED pixel size and pitch decrease, achieving high-quality In bumps on densely packed Micro-LED chips often presents more challenges. This paper describes the process of fabricating In bumps on micro-LEDs using thermal evaporation, highlighting an issue where In tends to grow laterally within the photoresist pattern, ultimately blocking the pattern and resulting in undersized and poorly dense In bumps on the Micro-LED chip. To address this issue, we conducted numerous experiments to study the height variation of In bumps within a range of photoresist aperture sizes (3 mu m -7 mu m) under two different resist thickness conditions (3.8 mu m and 4.8 mu m). The results showed that the resist thickness had a certain effect on the height of In bumps on the Micro-LED chip electrodes. Moreover, we found that, with the photoresist pattern size increasing under constant resist thickness conditions, the height and quality of the bumps significantly improved. Based on this finding, we rationalized the adjustment of the photoresist pattern size within a limited emission platform range to compensate for the height difference of In bumps caused by different resist thicknesses between the cathode and anode regions. Consequently, well-shaped and dense In bumps with a maximum height of up to 4.4 mu m were fabricated on 8 mu m pitch Micro-LED chips. Afterwards, we bonded the Micro-LED chip with indium bumps to the CMOS chip, and we found that we could successfully control the CMOS chip to drive the Micro-LED chip to display specific characters through the Flexible Printed Circuit (FPC). This work is of significant importance for the fabrication of In bumps on Micro-LED chips with pitches below 10 mu m and subsequent bonding processes.

Ämnesord och genrebeteckningar

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Chen, HuiFuzhou University (författare)
  • Zhang, Wen-JingFuzhou University (författare)
  • Lan, Jin-HuaFuzhou University (författare)
  • Yang, Tian-Xi (författare)
  • Lin, ChangFuzhou University (författare)
  • Huang, Zhong-Hang (författare)
  • Zhang, Kai-XinFuzhou University (författare)
  • Zhu, Xue-QiFuzhou University (författare)
  • He, JunFuzhou University (författare)
  • Yang, Yi-FanFuzhou University (författare)
  • Zhang, Yong-AiFuzhou University (författare)
  • Yan, QunFuzhou University (författare)
  • Sun, Jie,1977Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)jiesu (författare)
  • Fuzhou UniversityChalmers tekniska högskola (creator_code:org_t)

Sammanhörande titlar

  • Ingår i:ENGINEERING RESEARCH EXPRESS6:22631-8695

Internetlänk

Hitta via bibliotek

Till lärosätets databas

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy