Sökning: id:"swepub:oai:research.chalmers.se:85ce94c6-351c-4472-ba75-97b2759a9d42" >
Meta-Dynamic Recrys...
-
Eriksson, Emil,1990Chalmers tekniska högskola,Chalmers University of Technology,Department of Physics, Chalmers University of Technology, Gothenburg (SWE)
(författare)
Meta-Dynamic Recrystallization in the Ni-Based Superalloy Haynes 282
- Artikel/kapitelEngelska2023
Förlag, utgivningsår, omfång ...
-
MDPI,2023
-
electronicrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:research.chalmers.se:85ce94c6-351c-4472-ba75-97b2759a9d42
-
https://doi.org/10.3390/met13081335DOI
-
https://research.chalmers.se/publication/537284URI
-
https://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-21063URI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:art swepub-publicationtype
-
Ämneskategori:ref swepub-contenttype
Anmärkningar
-
CC BY 4.0The funding for the present work has been provided by the Swedish Agency for Innovation (VINNOVA) through the Swedish National Aeronautical Research Program (NFFP) grant no. 2017-04863 in collaboration with GKN Aerospace Engine Systems AB.
-
Forging on an industrial scale often involves slow, size-limited cooling rates or high temperature hold times between, or after, deformation. This enables the dynamic recrystallization (DRX) initiated during forging to further progress under static conditions, a phenomenon called meta-dynamic recrystallization (mDRX). As mDRX will influence the final grain size, and thus properties, it is critical to understand and control it during processing. Here, we study the mDRX evolution in Ni-based superalloy Haynes 282 during post-deformation hold times of up to 120 s at 1080 °C after partial DRX. We find that mDRX is the dominating mechanisms responsible for the microstructure evolution the hold time. The very rapid mDRX kinetics in the initial stages suggest that quench delays (the time between the end of the deformation and the onset of the quenching intended to arrest the microstructure evolution) must be kept well below 1 s in order to allow reliable conclusions to be drawn from post-deformation microstructure investigations. A larger prior strain (larger DRX fraction) leads to faster mDRX kinetics and a larger final grain size. Larger strains leads to earlier impingement of the growing grains, which, in combination with smaller remaining deformed regions into which the grains can grow, limits the maximum size of the mDRX grains. We also note a close correlation between static recovery and stress relaxation during the hold time, whereas no such correlation between mDRX and stress relaxation can be observed.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Hanning, Fabian,1988Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),KAMPT,University West(Swepub:hv)faha0010
(författare)
-
Andersson, Joel Håkan,1981Högskolan Väst,Avdelningen för svetsteknologi (SV),KAMPT,University West(Swepub:hv)joan0056
(författare)
-
Hörnqvist Colliander, Magnus,1979Chalmers tekniska högskola,Chalmers University of Technology,Department of Physics, Chalmers University of Technology, Gothenburg (SWE)(Swepub:cth)magnuh
(författare)
-
Chalmers tekniska högskolaDepartment of Physics, Chalmers University of Technology, Gothenburg (SWE)
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Metals: MDPI13:82075-4701
Internetlänk
Hitta via bibliotek
-
Metals
(Sök värdpublikationen i LIBRIS)
Till lärosätets databas