Sökning: WFRF:(Mattisson Tobias 1970) >
Investigation of Na...
Investigation of Natural and Synthetic Bed Materials for Their Utilization in Chemical Looping Reforming for Tar Elimination in Biomass-Derived Gasification Gas
-
- Keller, Martin, 1985 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
- Leion, Henrik, 1976 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
- Mattisson, Tobias, 1970 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
visa fler...
-
- Thunman, Henrik, 1970 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
visa färre...
-
(creator_code:org_t)
- 2014-05-14
- 2014
- Engelska.
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 1520-5029 .- 0887-0624. ; 28:6, s. 3833-3840
- Relaterad länk:
-
http://dx.doi.org/10...
-
visa fler...
-
https://research.cha...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- The removal of condensable hydrocarbons or tars from raw gas derived from biomass gasification presents an obstacle in the widespread application of biomass gasification. Hot catalytic tar cleaning as a secondary tar removal strategy is discussed as a tar cleaning technology. This can be realized in a dual-fluidized-bed reactor system, in which a catalytically active bed material is continuously regenerated. Such a process is termed chemical looping reforming (CLR). In such a process, it has been suggested that oxygen carrier particles employed for chemical looping combustion may be used, with the oxygen transfer from the particles to the gas promoting tar decomposition. Experiments were conducted in a small-scale, batch-wise fluidized-bed reactor with the aim of investigating a variety of bed materials for this process. The purpose of the present work is thus to conduct a screening study of a variety of bed materials based on the transition metals Fe, Mn, Ni, and Cu. The experiments were conducted in a batch fluidized bed, where the particles are exposed to reformer and regenerator conditions alternatingly. The conversion of ethylene from a synthetic gasification gas mixture was used as an indicator for the suitability of the materials for tar conversion. It was found that the natural material bauxite and the synthetic bed materials NiO/alpha-Al2O3, CuO/MgAl2O4, and La0.8Sr0.2FeO3/gamma-Al2O3 exhibit high ethylene conversion rates and, thus, possess promising properties for their application in CLR
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Energiteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Energy Engineering (hsv//eng)
Nyckelord
- METHANE
- PRODUCER GAS
- CATALYSTS
- ILMENITE
- GAS
- CARRIERS
- RAW
- FLUIDIZED-BED
- Engineering
- COMBUSTION
- Chemical
- WOODY BIOMASS
- OXYGEN UNCOUPLING CLOU
- Energy & Fuels
Publikations- och innehållstyp
- art (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas