On adhesion of work material in metal forming

Coronel, Ernesto (author)

Persson, Daniel H.E. (author)

(creator_code:org_t)

2008
2008
English.
In: International journal of microstructure and materials properties. - 1741-8410. ; 3:2-3, s. 401-412

Related links:: https://urn.kb.se/re...; show more...; https://doi.org/10.1...; show less...

Abstract Subject headings

The transfer of work material to the tool surface limits the tool life in many forming operations. Using a dedicated load-scanning test equipment with crossed-cylinder geometry, dry forming of austenitic stainless steel was simulated by provoking adhesion to the TiN-coated tool specimen. High-resolution electron microscopy combined with analytical techniques was used to examine the interface between tool and work material. The decisive mechanism for adhesion and transfer of steel to the TiN surface is suggested. The oxide layer on the steel surface, especially the Fe-oxide, initiates the metal transfer. The interfacial oxide acts as a glue between stainless steel and TiN and increases the adhesive forces. Obviously, the adhesion and internal strength of the oxide layer is far stronger than anticipated. It may even be stronger than the bonding to the austenitic steel itself. A consequence of these findings is that the development of galling resistance-forming tool materials and coatings for austenitic stainless steels should not only aim to improve the bulk tool material, but also to reduce the adhesion strength between the tool surface and the oxide layer on the work material.

By the author/editor: Hanson, Magnus; Hogmark, Sture; Coronel, Ernesto; Persson, Daniel ...

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.