Catalytic Upgrading of Waste Oils to Advanced Biofuels – Deactivation and Kinetic Modelling Study

• The demand for liquid hydrocarbons as transportation fuels is enormous and ever growing. Advanced biofuels is one of the promising solutions to keep pace with the global transition to cleaner energy by reducing greenhouse gas emissions from the transport sector. It is possible to selectively remove oxygen from waste oils like tall oil, used cooking oil etc. via a catalytic hydrodeoxygenation (HDO) process to produce advanced biofuels. These biofuels have similar molecules as in the traditional fossil-based fuels and exhibit improved performance. This thesis focuses on aspects of catalyst deactivation and kinetic modelling of HDO reactions.   In the first study, the influence of iron (Fe) as a poison during HDO of a model compound for renewable feeds (Oleic acid) over molybdenum based sulfided catalysts was investigated. Fe is a potential contaminant in renewable feeds due to corrosion during transportation and storage in iron vessels. A series of experiments with varying Fe-oleate concentration in the feed over MoS2/Al2O3 and NiMoS/Al2O3 catalysts. There was a salient drop in the activity of the catalysts. At higher Fe concentration, for the NiMoS catalyst, the selectivity for the direct hydrodeoxygenation product (C18 hydrocarbons) increased. However, it was opposite for the MoS2 catalyst. There was a decrease in the yield of direct hydrodeoxygenation products and an increase in yield of decarbonated products. It was proposed that Fe interacted with these two catalyst systems differently. Fe influenced the critical step of creation of sulfur vacancies in a negative way which resulted in lower activity. Microscopic analysis indicated that Fe was preferentially deposited close or around the nickel promoted phase, which explained why the role of Ni as a promoter for the decarbonation route was subdued for the NiMoS catalyst.   In the second study, the kinetics during HDO of stearic acid (SA) over a sulfided NiMo/Al2O3 catalyst were explored to investigate the reaction scheme. Model compounds like octadecanal (C18=O) and octadecanol (C18-OH) were employed to understand the reaction steps and quantify the selectivity. A Langmuir–Hinshelwood-type kinetic model was used to investigate the kinetics. The results from the proposed kinetic model were found to be in good agreement with experimental results. In addition, the model could effectively reproduce the observed experimental profiles of different intermediates like C18=O and C18-OH and illustrate phenomena like inhibiting effects of the fatty acid.

Subject headings

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik -- Kemiska processer (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering -- Chemical Process Engineering (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik -- Annan kemiteknik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering -- Other Chemical Engineering (hsv//eng)

NATURVETENSKAP  -- Kemi -- Annan kemi (hsv//swe)

NATURAL SCIENCES  -- Chemical Sciences -- Other Chemistry Topics (hsv//eng)

Keyword

Stearic acid

TEM

Advanced biofuels

NiMo

Catalytic HDO

MoS2

Kinetic modelling

Oleic acid

Hydrodeoxygenation

Publication and Content Type

lic (subject category)

vet (subject category)