Sökning: onr:"swepub:oai:DiVA.org:su-195272" >
Influence of Powder...
Abstract
Ämnesord
Stäng
- Laser powder bed fusion (LPBF) is being increasingly used in the fabrication of complex-shaped structure parts with high precision. It is easy to form martensitic microstructure in Ti-6Al-4V alloy during manufacturing. Pre-heating the powder bed can enhance the thermal field produced by cyclic laser heating during LPBF, which can tailor the microstructure and further improve the mechanical properties. In the present study, all the Ti-6Al-4V alloy samples manufactured by LPBF at different powder bed temperatures exhibit a near-full densification state, with the densification ratio of above 99.4%. When the powder bed temperature is lower than 400 degrees C, the specimens are composed of a single alpha ' martensite. As the temperature elevates to higher than 400 degrees C, the alpha and beta phase precipitate at the alpha ' martensite boundaries by the diffusion and redistribution of V element. In addition, the alpha/alpha ' lath coarsening is presented with the increasing powder bed temperature. The specimens manufactured at the temperature lower than 400 degrees C exhibit high strength but bad ductility. Moreover, the ultimate tensile strength and yield strength reduce slightly, whereas the ductility is improved dramatically with the increasing temperature, when it is higher than 400 degrees C.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering (hsv//eng)
Nyckelord
- Ti-6Al-4V alloy
- laser powder bed fusion
- powder bed temperature
- microstructure evolution
- mechanical properties
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas