Sökning: WFRF:(Gudmundsson Jon Tomas 1965 ) >
HiPIMS optimization...
HiPIMS optimization by using mixed high-power and low-power pulsing
-
- Brenning, Nils (författare)
- Linköpings universitet,KTH,Rymd- och plasmafysik,Univ Paris Saclay, Univ Paris Sud, UMR 8578 CNRS, Lab Phys Gaz & Plasmas LPGP, F-91405 Orsay, France.;Linköping Univ, Plasma & Coatings Phys Div, IFM Mat Phys, SE-58183 Linköping, Sweden.,Plasma och ytbeläggningsfysik,Tekniska fakulteten,Univ Paris Saclay, France; KTH Royal Inst Technol, Sweden
-
- Hajihoseini, Hamidreza (författare)
- Univ Iceland, Inst Sci, Dunhaga 3, IS-107 Reykjavik, Iceland.
-
- Rudolph, Martin (författare)
- Leibniz Inst Surface Engn IOM, Permoserstr 15, D-04318 Leipzig, Germany.
-
visa fler...
-
- Raadu, Michael A. (författare)
- KTH,Rymd- och plasmafysik,KTH Royal Inst Technol, Sweden
-
- Gudmundsson, Jon Tomas, 1965- (författare)
- KTH,Rymd- och plasmafysik,Univ Iceland, Inst Sci, Dunhaga 3, IS-107 Reykjavik, Iceland.,KTH Royal Inst Technol, Sweden; Univ Iceland, Iceland
-
- Minea, Tiberiu M. (författare)
- Univ Paris Saclay, Univ Paris Sud, UMR 8578 CNRS, Lab Phys Gaz & Plasmas LPGP, F-91405 Orsay, France.
-
- Lundin, Daniel (författare)
- Linköpings universitet,Plasma och ytbeläggningsfysik,Tekniska fakulteten
-
visa färre...
-
(creator_code:org_t)
- 2021-01-29
- 2021
- Engelska.
-
Ingår i: Plasma sources science & technology. - : IOP Publishing. - 0963-0252 .- 1361-6595. ; 30:1
- Relaterad länk:
-
https://iopscience.i...
-
visa fler...
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
https://urn.kb.se/re...
-
visa färre...
Abstract
Ämnesord
Stäng
- The possibility to optimize a high-power impulse magnetron sputtering (HiPIMS) discharge through mixing two different power levels in the pulse pattern is investigated. Standard HiPIMS pulses are used to create the ions of the film-forming material. After each HiPIMS pulse an off-time follows, during which no voltage (or, optionally, a reversed voltage) is applied, letting the remaining ions in the magnetic trap escape towards the substrate. After these off-times, a long second pulse with lower amplitude, in the dc magnetron sputtering range, is applied. During this pulse, which is continued up to the following HiPIMS pulse, mainly neutrals of the film-forming material are produced. This pulse pattern makes it possible to achieve separate optimization of the ion production, and of the neutral atom production, that constitute the film-forming flux to the substrate. The optimization process is thereby separated into two sub-problems. The first sub-problem concerns minimizing the energy cost for ion production, and the second sub-problem deals with how to best split a given allowed discharge power between ion production and neutral production. The optimum power split is decided by the lowest ionized flux fraction that gives the desired film properties for a specific application. For the first sub-problem we describe a method where optimization is achieved by the selection of five process parameters: the HiPIMS pulse amplitude, the HiPIMS pulse length, the off-time, the working gas pressure, and the magnetic field strength. For the second sub-problem, the splitting of power between ion and neutral production, optimization is achieved by the selection of the values of two remaining process parameters, the HiPIMS pulse repetition frequency and the discharge voltage of the low-power pulse.
Ämnesord
- NATURVETENSKAP -- Fysik (hsv//swe)
- NATURAL SCIENCES -- Physical Sciences (hsv//eng)
- NATURVETENSKAP -- Fysik -- Annan fysik (hsv//swe)
- NATURAL SCIENCES -- Physical Sciences -- Other Physics Topics (hsv//eng)
Nyckelord
- magnetron sputtering
- high-power impulse magnetron sputtering (HiPIMS)
- ionization
- deposition rate
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas