Search: WFRF:(Andersson Sören) > (2020-2024) > Investigation of cu...
Fältnamn | Indikatorer | Metadata |
---|---|---|
000 | 02641naa a2200325 4500 | |
001 | oai:DiVA.org:hig-32865 | |
003 | SwePub | |
008 | 200619s2020 | |||||||||||000 ||eng| | |
024 | 7 | a https://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-328652 URI |
024 | 7 | a https://doi.org/10.1016/j.heliyon.2020.e042172 DOI |
040 | a (SwePub)hig | |
041 | a engb eng | |
042 | 9 SwePub | |
072 | 7 | a ref2 swepub-contenttype |
072 | 7 | a art2 swepub-publicationtype |
100 | 1 | a Tatar, Kourosh,d 1973-u Högskolan i Gävle,Maskinteknik4 aut0 (Swepub:hig)kohtar |
245 | 1 0 | a Investigation of cutting conditions on tool life in shoulder milling of Ti6Al4V using PVD coated micro-grain carbide insert based on design of experiments |
264 | 1 | b Elsevier,c 2020 |
338 | a print2 rdacarrier | |
520 | a Tool life prediction is generally of great importance in all metal cutting processes, including milling titanium. In this paper, tool life testing was performed based on full factorial design. The cutting speed and width varied between 100 and 120 m/min, and 10 and 70 percent of tool diameter, respectively. All cutting tests were performed in Ti6Al4V under wet conditions using Physical Vapor Deposition (PVD) coated milling inserts. The wear limit was set to 0.2 mm. The data were analyzed using multiple regression analyses, where the method of least squares was applied. A mathematical tool life model was established. Roughly, for each one percent increase in cutting width, tool life decreases on average by one percent, and an increase in cutting speed by a percent leads to a decrease in tool life by four percent. The adequacy of the model was verified using analysis of variance at 95% confidence level. Tool life contour in cutting width and speed was generated from the model. The results can be used for selecting optimum cutting parameters for providing a desired tool life or maximum metal removal rates for a favored tool life. | |
650 | 7 | a TEKNIK OCH TEKNOLOGIERx Maskinteknik0 (SwePub)2032 hsv//swe |
650 | 7 | a ENGINEERING AND TECHNOLOGYx Mechanical Engineering0 (SwePub)2032 hsv//eng |
700 | 1 | a Sjöberg, Sören,d 1971-u Högskolan i Gävle,Maskinteknik4 aut0 (Swepub:hig)sonsjg |
700 | 1 | a Andersson, Niklasu Sandvik Coromant4 aut |
710 | 2 | a Högskolan i Gävleb Maskinteknik4 org |
773 | 0 | t Heliyond : Elsevierg 6:6q 6:6x 2405-8440 |
856 | 4 | u https://doi.org/10.1016/j.heliyon.2020.e04217y Fulltext |
856 | 4 | u http://www.cell.com/article/S2405844020310616/pdf |
856 | 4 8 | u https://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-32865 |
856 | 4 8 | u https://doi.org/10.1016/j.heliyon.2020.e04217 |
Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.