High pressure characterization and modelling of CaCO3 powder mix in the Bridgman anvil apparatus

• For investigating high pressure sintering processes, numerical models can be used. This will demand material models which give realistic mechanical response throughout the whole parameter space of the actual process. As the pressures become higher, the material density approaches its full theoretical value and the elastic part of the material properties becomes increasingly important. In this investigation, Poisson's ratio was determined using ultrasonic pulse-echo measurements. A new elastic model and an improved plasticity model were implemented into a user-defined material subroutine in a finite element (FE) code. To experimentally investigate the load displacement response and pressure distribution in powder compacts during pressing, a pressure instrumented Bridgman anvil apparatus was used. Validation of the FE model was conducted against experimental data from pressing experiments using two different start densities. The results show that the simulation model is indeed capable of reproducing load–thickness curves and pressure profiles reasonable close to the experimental curves.

Ämnesord

TEKNIK OCH TEKNOLOGIER  -- Maskinteknik -- Teknisk mekanik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Mechanical Engineering -- Applied Mechanics (hsv//eng)

TEKNIK OCH TEKNOLOGIER  -- Elektroteknik och elektronik -- Annan elektroteknik och elektronik (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Electrical Engineering, Electronic Engineering, Information Engineering -- Other Electrical Engineering, Electronic Engineering, Information Engineering (hsv//eng)

Nyckelord

Hållfasthetslära

Solid Mechanics

Industriell elektronik

Industrial Electronics

Publikations- och innehållstyp

ref (ämneskategori)

art (ämneskategori)